5.5"X2.4"Universal Pink Aluminum Oil Catch Can Reservoir 140Ml+Breather Filter •Honda 2-Piece Philips & Standard Screw

2-Piece Philips & Standard Screw Driver Bits

Lower Engine Intake Air Temperature:

If the V157 flapper motor fails to move after the bracket is installed you can pull the motor arm forward into operating range with the engine running to "jump start" it

Holds Up to 140ml Safely Before Needs to be Drained

This shifter is designed to install in about an hour

5.5"X2.4"Universal Pink Aluminum Oil Catch Can Reservoir 140Ml+Breather Filter •Honda 2-Piece Philips & Standard ScrewAn oil catch tank can is used in turbo applications, or high performance racing applications where excessive blow by (leakage past the piston rings) of air and fuel vapor occurs. This creates a positive pressure in the crankcase. During engine operation, blow by gases, as well as oil mist from the rotating components of the engine, pass through the PCV valve and are routed back into the intake for the engine to burn off. However, some of the oil mist